PLA Filament, 3D4Makers
By A Mystery Man Writer
Description
PLA Filament PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants. Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines. Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.24 g/cc. The glass temperature is typically around 50 °C and it as a melting temperature between 80 and 150 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable. Great printability Biodegradable Food contact approved Printer settings Description Value Printer nozzle temperature 180 - 220°C Heated bed temperature 20 - 60°C Bed Adhesion Magigoo
PLA Filament PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants. Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines. Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.24 g/cc. The glass temperature is typically around 50 °C and it as a melting temperature between 80 and 150 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable. Great printability Biodegradable Food contact approved Printer settings Description Value Printer nozzle temperature 180 - 220°C Heated bed temperature 20 - 60°C Bed Adhesion Magigoo Original on glass or a PEI Sheet Physical properties Description Value Test method Density 1,24 g/cc ISO 1183 Tensile strength at yield 66 MPa ISO 527 Tensile (E) modulus 3027 MPa ISO 527 Impact strength - Charpy method 23˚C 3,4 kJ/m² ISO 179 Moisture absorption 1968 ppm ISO 62 Glass transition temp 57°C ISO 11357 Measurements & Tolerance Size Diameter tolerance Roundness 1,75 mm Filament +/- 0,05mm 95% 2,85 mm Filament +/- 0,10mm 95% Additional info To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. When the 3D printer is not being used it is important to keep the 3D4MAKERS PLA Filament in a bag and stored in a cool (15-25˚C) and dry room away from UV light until it is used again.
PLA Filament PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants. Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines. Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.24 g/cc. The glass temperature is typically around 50 °C and it as a melting temperature between 80 and 150 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable. Great printability Biodegradable Food contact approved Printer settings Description Value Printer nozzle temperature 180 - 220°C Heated bed temperature 20 - 60°C Bed Adhesion Magigoo Original on glass or a PEI Sheet Physical properties Description Value Test method Density 1,24 g/cc ISO 1183 Tensile strength at yield 66 MPa ISO 527 Tensile (E) modulus 3027 MPa ISO 527 Impact strength - Charpy method 23˚C 3,4 kJ/m² ISO 179 Moisture absorption 1968 ppm ISO 62 Glass transition temp 57°C ISO 11357 Measurements & Tolerance Size Diameter tolerance Roundness 1,75 mm Filament +/- 0,05mm 95% 2,85 mm Filament +/- 0,10mm 95% Additional info To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. When the 3D printer is not being used it is important to keep the 3D4MAKERS PLA Filament in a bag and stored in a cool (15-25˚C) and dry room away from UV light until it is used again.
![PLA Filament, 3D4Makers](https://filamentworld.de/wp-content/uploads/2022/11/3d-drucker-filament-3d4makers-facilan-c8-natur-5.jpg)
3D Drucker 3D4Makers Facilan C8 Filament 1.75 mm - PLA/PCL kaufen
![PLA Filament, 3D4Makers](https://3dprint.com/wp-content/uploads/2017/02/PLLA_Filament_print_large.jpg)
3D4Makers: Father-Son Team Tell Us About New Filament Extrusion Technology and Building a Business Spurred by Failed 3D Prints
![PLA Filament, 3D4Makers](https://www.3d4makers.com/cdn/shop/products/PhotoLuvocom3FPEKK50082Filament3Dprinting_600x.png?v=1605685749)
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
![PLA Filament, 3D4Makers](https://cdn.webshopapp.com/shops/33250/files/59126842/3d4makers-pla-285mm-750-gram-several-colors.jpg)
3D4Makers PLA 2,85mm, 750 gram (several colors)
![PLA Filament, 3D4Makers](https://www.3d4makers.com/cdn/shop/files/Facilan_Ortho_Filament_foto_slide_1200x.png?v=1613570833)
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
![PLA Filament, 3D4Makers](https://www.3d4makers.com/cdn/shop/articles/PCL_Filament_banner_800x.jpg?v=1478863578)
3D4Makers introduces PCL filament
![PLA Filament, 3D4Makers](http://www.3d4makers.com/cdn/shop/products/PhotoABSRedFilament3Dprinting.png?v=1591558677)
ABS Filament, 3D4Makers
![PLA Filament, 3D4Makers](https://3dprintingservices.co.nz/wp-content/uploads/2019/05/PEEK-3d-print-gears-au-nz.jpg)
PEEK 3D Printer Filament 1.75mm 3d4makers Luvocom 3F 9581 NT 200g • 3D Printer Store
![PLA Filament, 3D4Makers](https://www.3dprintaj.com/wp-content/uploads/2022/12/3D4Makers-Luvocom-3F-PAHT-98251-300x300.webp)
3D4Makers filamenti - jer u proizvodnji 3D printanjem nema kompromisa!
![PLA Filament, 3D4Makers](https://www.3d4makers.com/cdn/shop/products/PhotoPLAIronGreyFilament3Dprinting_800x.png?v=1626222795)
PLA Filament, 3D4Makers
from
per adult (price varies by group size)